Wireless N Access Point
The
D-Link DAP-1353 Wireless N Access Point is an 802.11n (draft) compliant
device that delivers real world performance of up to 650% faster, 5
times farther than an 802.11g wireless connection and is faster than
100Mbps wired Ethernet1. By connecting the DAP-1353 Access Point to a
switch or a router, users will be able to share their high-speed
Internet access with everyone on the network and create a secure
wireless network to share photos, files, music, video, printers and
network storage throughout their home or office.
|
|
Based on Wireless N technology, the DAP-1353 features a 3x3 MIMO (Multiple In Multiple Out) antenna design to achieve wireless speeds of up to 300Mbps and to eradicate dead spots.
The effect is enhanced on this Access Point by using 3dBi dipoles to maximise range, making it ideal in office environments.
Backward and Forward Compatibility
Based on the
draft IEEE 802.11n specification, the DAP-1353 is almost guaranteed to
comply with the final version of the standard through a mere firmware
update, ensuring lasting use in business environments.
Furthermore,
Wireless N technology remains fully compatible with older 802.11g and
802.11b standards, so the entire network does not need an expensive
upgrade to maintain connectivity. However, the use of other Wireless N
devices is recommended to ensure the highest speeds and best coverage
free of dead spots.
The Access Point also enforces a good
neighbour policy, ensuring that it will not create interference for
neighbouring networks. This is achieved by reducing the amount of radio
spectrum used when detecting a legacy 802.11g/b network in the
vicinity.
Flexible Configuration
The DAP-1353 can be configured to operate in any of the following 5 modes:
(1) Wireless Access Point (AP),
(2) Wireless Distribution System (WDS) bridge, with one or more peer APs, to easily create dedicated building-to-building links,
(3) WDS with AP, to allow wireless clients on the WDS link,
(4) Wireless client, to give wireless N connectivity to any Ethernet-enabled device, such as a printer or a gaming console,
(5) Wireless repeater.
These built-in functions give the DAP-1353 the versatility to meet the requirements of various environments.
Multiple SSIDs
In AP mode, the DAP-1353
supports multiple SSIDs, allowing a single device to be logically
divided into several virtual Access Points. For instance, one SSID
could have encryption and authentication enabled for internal use and
another open for guests and visitors.
With multiple SSIDs, the number of physical APs deployed may be reduced, minimising interference and keeping costs down.
Robust Security
The DAP-1353 features
WPA/WPA2-PSK (Wi-Fi Protected Access with Pre-Shared Key), a method of
data encryption that has never been cracked, provided the key is strong
enough.
User authentication can be enforced by using the AP in
conjunction with a RADIUS server, to protect against outside intrusion.
This is achieved with the 802.1X protocol also supported. In addition,
the number of users can be limited and MAC-address filtering is also
possible.
Easy to Setup, Easy to Use
The
D-Link Clickn Connect (DCC) wizard allows anyone without prior
technical knowledge to install the Access Point, just by running the
product CD. In just a few simple steps, the user is taken through
establishing physical connections (power and cabling) and configuring
encryption keys.
All the DAP-1353's settings can be accessed and modified via a web browser.
Hardware
- IEEE 802.11n (Draft) specification, 300 Mbps raw data rate
- Backward compatible with 802.11g/11b wireless networks
- One 10/100 Mbps Ethernet port for connection to a switch or router
- Detachable antennae (reverse SMA connector, female)
Wireless
- 5 operation modes: AP, WDS. WDS with AP, client and repeater
- Multiple SSIDs (8) for network segmentation
- Wi-Fi Multimedia (WMM) support
- User limit
Security
- 64/128-bit WEP encryption
- Wi-Fi Protected Access (WPA/WPA2)
- MAC address filtering
- SSID Broadcast Disable function
- 802.1Q VLAN tagging
- Support for 802.1X RADIUS
Management
- D-Link Clickn Connect (DCC) easy set-up with wizard
- Web-based management