APC Power Saving Back-UPS Pro 900, 230V (BR900GI)

Brands In Category

APC 15 AWP 5 Belkin 1 Eaton 5 Emerson 1 Hashi 1 Secure 1

APC Power Saving Back-UPS Pro 900, 230V (BR900GI)

Price: Not Available.

Status: Phased Out

Product Description:
540Watts / 900VA UPS

BR900GI Features

LCD graphics display

Text and mimic diagrams that display modes of operation, system parameters and alarms.

Battery replacement without tools

Enables fast battery replacement, lowering Mean Time to Repair (MTTR).

Resettable circuit breaker

Easy recovery from overloads; no need to replace a fuse.

Boost and Trim Automatic Voltage Regulation (AVR)

Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.

Serial connectivity

Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.

Green mode

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Disconnected battery notification

Warns when a battery is not available to provide backup power.

Adjustable voltage sensitivity

Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Adjustable voltage-transfer points

Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Audible alarms

Provides notification of changing utility power and UPS power conditions

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery-protected and surge-only outlets

Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

Cold-start capable

Provides temporary battery power when the utility power is out.

Dataline surge protection

Provides protection of connected equipment from power surges on the data lines.

Hot-swappable batteries

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Battery failure notification

Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Serial connectivity

Provides management of the UPS via a serial port.

Transformer-block spaced outlets

Protect equipment with input transformer blocks without blocking access to other receptacles.

USB connectivity

Provides management of the UPS via a USB port (not available on all models).

User-replaceable batteries

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Power-saving outlets

Automatically cuts power to idle equipment to conserve electricity.

Boost and Trim Automatic Voltage Regulation (AVR)

Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Back-UPS Pro Features & Benefits

Protection

Battery and surge protected outlets

Back up and protect your hardware and data during power outages, surges and spikes.

Dataline surge protection

Provides protection of connected equipment from power surges on the data lines.

Surge only outlets

Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

Availability

Energy Management Function

Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.

Boost and Trim Automatic Voltage Regulation (AVR)

Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Green mode

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Customizable voltage-transfer points

Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.

Customizable voltage sensitivity

Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.

Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Cold-start capable

Provides temporary battery power when the utility power is out.

Battery failure notification

Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Transformer-block spaced outlets

Protect equipment with input transformer blocks without blocking access to other receptacles.

Serviceability

Resettable circuit breaker

Easy recovery from overloads; no need to replace a fuse.

Simple battery replacement

Increases UPS availability by allowing quick, easy battery replacement.

Manageability

USB connection

Use your PC to access additional power protection and management features for your UPS via a USB Port.

LCD Status Display

Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.

Audible alarms

Provides notification of changing utility power and UPS power conditions

Disconnected battery notification

Warns when a battery is not available to provide backup power.

Safety

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

TECH SPECS

Output

Output Power Capacity

540 Watts / 900 VA

Max Configurable Power

540 Watts / 900 VA

Nominal Output Voltage

230V

Efficiency at Full Load

98.6%

Output Frequency (sync to mains)

50/60 Hz +/- 3 Hz user adjustable +/- 0.1

Crest Factor

3 : 1

Topology

Line Interactive

Waveform Type

Stepped approximation to a sinewave

Output Connections

(4) IEC 320 C13 (Battery Backup)
(4) IEC 320 C13 (Surge Protection)
(2) IEC Jumpers (Battery Backup)

Efficiency at Half Load

97.6%

Bypass

Built-in Bypass

Input

Nominal Input Voltage

230V

Input Frequency

50/60 Hz +/- 3 Hz (auto sensing)

Input Connections

IEC-320 C14

Input voltage range for main operations

176 - 294V

Input voltage adjustable range for mains operation

156 - 300V

Maximum Input Current

Input Breaker Capacity

10 A

Batteries & Runtime

Battery Type

Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

Typical recharge time

8 hour(s)

Replacement Battery

APCRBC123

RBC Quantity

Runtime Graph

Hover over the line on the graph above to view the runtime at any desired load

This graph is based on actual measured runtime data. All measurements were taken with new, fully charged batteries and a balanced resistive load (PF = 1.0). Actual runtimes may vary from the values of this graph. Actual runtimes are dependent on several variables including battery age, battery charge level, environmental conditions and characteristics of the connected load.

View Enlarged Graph

View Runtime Chart

Communications & Management

Interface Port(s)

Optional Simple Signalling RS232 cable, USB

Control panel

Multi-function LCD status and control console

Audible Alarm

Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering

Surge energy rating

613 Joules

Filtering

Full time multi-pole noise filtering :10% of IEEE surge let-thgouh : zero clamping response time: instantaneous

Data Line Protection

Analog phone line for phone/fax/modem/DSL (RJ-11 connector), Network line - 10/100/1000 Base-T Ethernet (RJ-45 connector)

Physical

Maximum Height

250.00 mm

Maximum Width

100.00 mm

Maximum Depth

382.00 mm

Net Weight

10.72 KG

Shipping Weight

11.70 KG

Shipping Height

337.00 mm

Shipping Width

225.00 mm

Shipping Depth

487.00 mm

Master Carton Units

1.00

Color

Black

SCC Codes

1073130427959 1

Located in the Philippines!